1. Once the Large C is on and booted up then input:
• Last Name
• First Name
• MRN #
• Doctor
• Procedure
2. Press the image tab on the top of the screen to get ready to take x-rays

Inputing the Procedure is optional but can be useful to have saved if you need to go back to find a case in the future

1. After taking an X-ray, press the Save button that is on the Large C-Arm above the keyboard
2. On right side of the screen, change the TO section to "Onboard Printer"
3. You can press "Layout" to change how many pictures you can print on one sheet of paper
4. Select the number of copies that you need as well from this page
5. Touch the image that you are looking to print and then touch one of the boxes (like a drag-and-drop)
6. You can do this with as many images you need depending on the layout you have chosen
Press "Print" to send the images to the printer

1. Press the "Patient" tab that is up top
2. Press "Saved Exams" on the right to get to the previous exams
3. Search through the list of all the previous exams to find the one you are looking for and press the checkbox to select the patient
4. From here you can open up the patient's case and print or export images as needed

1. To Export images to a USB you will plug a USB into the port that is on the Large C-Arm above the keyboard
2. Select all images you need to save by pressing "Select All" then tapping the images that you do NOT want to save
3. Send over to the USB by pressing the "Send"

1. To change the paper just press the "Open" button that is located on the right side of the printer
2. The paper cartrige tray will open and you can pull the empty roll out and repalce with the new roll
3. Pull a little but of the paper out so that it will feed properly. This can be a bit tricky to get into the corect slot so be patient
4. I usually press the "Feed" button to test the paper feeding prior to printing

1. Turn ON the Large C-Arm FIRST without the Display Port cable plugged in
2. Once the system has booted up, plug the display port cable into the Boom or Wall Aux
3. This should work and you will be able to then go over to the nurses touchpanel and route either the Boom or Wall Aux to get the monitors up and running with the x-ray
4. If there are problems: Press "Applications", "Utilities", "Video Output" and then tap one of the boxes to reset and see if that works

---

1. Press "Applications"
2. Press "Setup"
3. Press "Utilities"
4. Press "Video Output"
5. Then unplug the Display Port Cable that is in the Boom or Wall
6. After that then switch the Display Port cable that is in the back of the C-Arm machine to the other port
7. Plug the Display Port cable back into the Wall or Boom Aux and then tap the boxes to deselect BOTH Boxes
8. Tap a box again and the press apply and then it should start working

---

1. Press "Applications"
2. Press "Setup"
3. Press "Utilities"
4. Press "Video Output"
5. Then unplug the Display Port Cable that is in the Boom or Wall
6. After that then switch the Display Port cable that is in the back of the C-Arm machine to the other port
7. Plug the Display Port cable back into the Wall or Boom Aux and then tap the boxes to deselect BOTH Boxes
8. Tap a box again and the press apply and then it should start working

---

1. Is the Patient Information plugged in?
2. Is the C-Arm routed to the monitors if needed?